Rear panel of SVR-450
Rear panel of SVR-940
2.2.2 Rear Connection terminals
1. VIDEO IN Camera Input (NTSC/PAL)
2. AUDIO IN Audio Input
3. AUDIO OUT Audio Output
4. VIDEO OUT Composite Video Output
5. VGA VGA output
6. RS-232 For the engineering console only, not for other purposes.
7. LAN RJ45 Connector
8. RS-485/422 PTZ camera control
9. SENSOR IN Sensor Input
10. ALARM OUT Alarm Output
11. SWITCHES NTSC/PAL, BNC/VGA Select Switch(Please refer to Chapter 5 for the detailed
guide.)
12. SPOT Spot output (For SVR-940)
13. SVHS S-VHS output
2.2.3 Remote controller
• MENU Button to enter Setup Menu
• AUTO For Auto Sequence
• SPOT Button for Spot ON/OFF (SVR-940.)
• PTZ Button for PTZ camera control.
• COPY Button for data backup.
• RECORD Button for Manual record ON/OFF.
• STOP Button to stop playback.
• SEARCH Button for search menu.
• STEP Playback position moves 1 frame forward/back during
Pause.
• PLAY/PAUSE Button to Play and Pause the Playback screen
• FAST Button for Forward Playback. Speeds of 2X, 4X, 8X.
• DIR Button to select and change the direction of play in
playback. When pressed during forward playback,
the system reverses the direction of play.
• ENTER Button to select full screen, quad screen, or 9-channel
screen (for SVR-940) in live monitoring mode.
It can also be used to select a desired menu item or
to store a setup value in the menu.
• MULTI Button to select the live display format as full screen,
quad screen, or 9-channel screen (for SVR-940)
display.
• ESC Button to return to the previous Menu screen.
• 0~9 Button to set Remote controller ID / Password /
IP setting. Only 0 to 9 is available for the remote
controller ID.
2.3 Specification
System
Items SVR-450 SVR-940
Processor DSP
Operating system (O/S) RTOS
Compression method MPEG-4
Chapter 2. Summary Chapter 2. Summary
To Next Page
Loading...
