37
Screen Setup
3
3 Screen Setup
3.3 Sharpness
Make the outline of objects more clear or blurry. (Range: 0~100)
A higher value will make the outline of objects clearer.
This option is not available when Bright is in Cinema or Dynamic Contrast mode.
This menu is not available when Game Mode is enabled.
Not available when PIP/PBP Mode is set to On.
3.3.1 Configuring Sharpness
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3 Move to Sharpness controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4 Adjust the Sharpness controlling the JOG button LEFT/RIGHT.
5 The selected option will be applied.