Samsung U28D590D

68
Setup and Reset
6
6 Setup and Reset
6.3 Source Detection
You can activate Source Detection.
6.3.1 Configuring Source Detection
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button.
3 Move to Source Detection controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
 Auto: The input source is automatically recognized.
 Manual: Manually select an input source.
4 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5 The selected option will be applied.
Off
Auto
Manual
Decide how input
sources will be
detected.
Settings
Eco Saving
PC/AV Mode
Source Detection
Key Repeat Time
Off Timer
Power LED On
Reset All
Stand-by