Samsung U28D590D

67
Setup and Reset
6
6 Setup and Reset
6.2 PC/AV Mode
Set PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie.
 This function does not support Analog mode.
 Supplied for the wide models only such as 16:9 or 16:10.
 If the monitor (when set to HDMI 1, HDMI 2 or DisplayPort) is in power saving mode or is
displaying the message Check Signal Cable, press the MENU button to display the On Screen
Display(OSD). You can select PC or AV.
6.2.1 Configuring PC/AV Mode
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to Settings controlling the JOG button UP/DOWN and press the JOG button.
3 Move to PC/AV Mode controlling the JOG button UP/DOWN and press the JOG button.
4 Move to the HDMI 1, HDMI 2 or DisplayPort controlling the JOG button UP/DOWN and press the
JOG button.
The following screen will appear.
5 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
6 The selected option will be applied.
Set to AV to enlarge
the picture.
Settings
Off
Auto
Acceleration
Stand-by
Eco Saving
PC/AV Mode
Source Detection
Key Repeat Time
Off Timer
Power LED On
Reset All
PC/AV Mode
DisplayPort
HDMI 1
HDMI 2
PC
AV
Select the PC/AV mode
for the DisplayPort
source.
PC/AV Mode
Select the PC/AV mode
for the HDMI 1 source.
DisplayPort
HDMI 1
HDMI 2
PC
AV