46
Screen Setup
3
3 Screen Setup
3.9 Response Time
Accelerate the panel response rate to make video appear more vivid and natural.
It is best to set Response Time to Standard or Faster when you are not viewing a movie.
Not available when PIP/PBP Mode is set to On.
3.9.1 Configuring the Response Time
1 When the Function Key Guide appears, select [ ] by moving the JOG button UP.
Next, press the JOG button.
2 Move to Picture controlling the JOG button UP/DOWN and press the JOG button.
3 Move to Response Time controlling the JOG button UP/DOWN and press the JOG button.
The following screen will appear.
4 Move to the desired option controlling the JOG button UP/DOWN and press the JOG button.
5 The selected option will be applied.
To Next Page
Loading...
