4. Test Mode & Error Check
4-1-1. Quick Test Mode
1. All LED’s light up and it sends out Beep Sound when it
enters into the Quick Test Mode. (Including 7-
Segment)
2. Displays software version for a sec and Clear EEprom.
(Ex. If S/W Version is 49, 7-Segment will display
dE49)
3. When the version is displayed, turn the Jog-Dial so that
the version disappears. Press the following keys to
test the various components.
-
Temp Key : Water Valve Test
-
Spin Key : Door Lock/Unlock Test
-
Soil Key : Water Heater Test
Water Test
- Signal : Drain Pump Test
To Next Page
Loading...
