4. Test Mode & Error Check
4-2. Diagnostic Code & Corrective Action
NO
Error
Code
Description
Corrective Action
16 2E
Voltage for motor control bus is over or under
specified limit.
Replace PCB
17 suds
Suds is detected during the washing session.
(“SUdS” is not an error. If the washer is in suds
period, “SUdS” will light up instead of remaining time.)
Guide a user to reduce amount of detergent usage.
18 AE
Communication error between SUB PBA and MAIN
PBA
Check Main PBA, SUB PBA & Wire-harness.
Replace PCB
19 SF
System Error Replace PCB
To Next Page
Loading...
