Sanyo PLC-WTC500L - Page 21

-21-
Mechanical Disassembly
1-3. Prism Cover removal
1. Loosen 1 screw-D and slide the Lamp Cover backward.
2. Loosen 1 screw-E and turn the Prism Cover up and pull it upward to re-
move. (Press the 2 places to unhook the hinges.)
1-4. Filter Cover removal
1. Slide the Filter Cover fully and remove it upward.
E
D
Prism cover
T3x6
Lamp cover
Filter cover
Hinges