Sanyo PLC-WTC500L - Page 27

-27-
Mechanical Disassembly
7-1. Power Board Assy removal
1. Remove 7 screws-A (M3x6) on the Power Box Top Cover and remove the
top cover.
2. Remove 2 screws-B (M3x6) and remove the Power Board Assy.
A
A
A
A
A
A
B
B
M3x8
M3x8
Power board
Isolation sheet
Power box top cover
Power board assy
7-2. Relay Board removal
1. Remove 2 screws-C (M3x8) and unhook 2 hooks and
remove the Relay Board.
C
C
Relay board
A