Sanyo PLC-WTC500L - Page 36

-36-
Optical Parts Disassembly
1-2. LCD Panel/Prism Assy disassembly
1. Remove 1 screw-A (M2x4) each on the stopper and remove the stopper-B
and C, and pull the Polarized Glass-Out and Pre-Polarized Glass upward.
A
A
A
Polarized glass-out (B)
Pre-Polarized glass (B)
Polarized glass-out (G)
Polarized glass (G)
Pre-Polarized glass (R)
(Green)
(Red)
(Blue)
Stopper-C
Stopper-B
Stopper-C
There is a single-glass type or a double-glass type for
the Polarized Glass (G). When replacing it, must be
used with the same type of the Polarized Glass (G). It
is no compatibility between a single-glass type and a
double-glass type.
The double-glass type structure
Glass cover
Spacer
Polarized glass
Polarized glass-out (R)
Black Marker
Black Marker
Black Marker
The single-glass type structure