38
Chapter 5 Wireless LAN configurations
Use of security type "WPA-PSK", "PWA2-PSK"
1. Use the Point ! buttons to select "WPA-PSK" security type. WEP security setting fields are grayed
out.
2. Select “Next” and press SELECT button. The PSK key confirmation screen appears.
3. Use the Point buttons to select the key field and press SELECT button. The PSK key entry screen
appears. Enter the PSK key by using the Pointbuttons. If the input PSK key has an error, the PSK key is
indicated in red.
4. Use the Point buttons to select “Set” and press SELECT button to return to the PSK
confirmation screen. Select “Set” and press SELECT button to complete the PSK key setting and the
Wireless setting screen appears. Select “Set” and press SELECT button to complete the network
configuration.
WPA-PSK configuration screen
Available PSK key characters
ASCII code......8 to 63 digits
Hex code.........64 digits
* Security "WPA-PSK" and "PWA2-PSK" modes are not available when the "AdHoc" network type is selected.
* When you set the PSK keys with 64 digits, the projector checks whether all of the entered PSK keys are in Hex code
or not. If any of the ASCII code is included in the entered PSK keys, the entered PSK keys are indicated in red as error.
To Next Page
Loading...
