EasyManua.ls Logo

Sanyo PLC-XC50 - Cleaning the Lens Cover; Cleaning the Projector Cabinet

Sanyo PLC-XC50
80 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64
Maintenance and Care
Cleaning the Projector Cabinet
Softly wipe the projector body with a soft, dry cleaning
cloth. When it is heavily soiled, use a small amount of
mild detergent and finish with a soft, dry cleaning cloth.
Avoid using an excessive amount of cleaner. Abrasive
cleaners, solvent, or other harsh chemicals might
scratch the surface.
Follow these steps to clean the projector cabinet.
When the projector is not in use, put the projector in
an appropriate carrying case to protect it from dust and
scratches.
Cleaning the Lens Cover
Disconnect the AC power cord before cleaning.
Follow these steps to clean the lens cover.
Softly wipe the lens cover with a cleaning cloth that
contains a small amount of non-abrasive camera lens
cleaner, or use lens cleaning paper or a commercially
available air blower to clean the lens. Avoid using
an excessive amount of cleaner. Abrasive cleaners,
solvent, or other harsh chemicals might scratch the
surface.
1
2
1
2
3
Disconnect the AC power cord before cleaning.
Appendix

Table of Contents

Other manuals for Sanyo PLC-XC50

Related product manuals