Sanyo PLC-XC50 - Installation; Positioning the Projector; Adjustable Feet

13
Installation
Part Names and Functions
Notes:
• The brightness in the room has a great influence on picture quality. It is recommended to limit ambient
lighting in order to obtain the best image.
• The values shown below are approximate and may vary from the actual sizes.
Positioning the Projector
Screen Size
(W x H) mm
4 : 3 aspect ratio
Zoom (min)
40"
Zoom (max)
813 x 610
5.5' (1.7 m)
100"
2032 x 1524
13.9' (4.2 m)
11.6' (3.5 m)
150"
3048 x 2286
20.9' (6.4 m)
17.4' (5.3 m)
200"
4064 x 3048
27.8' (8.5 m)
23.2' (7.1 m)
300"
6096 x 4572
41.8' (12.7 m)
34.8' (10.6 m)
4.6' (1.4 m)
11.6' (3.5 m)
4.6' (1.4 m)
17.4' (5.3 m)
23.2' (7.1 m)
34.8' (10.6 m)
41.8' (12.7 m)
For projector positioning, see the figures below. The projector should be set horizontally to the flat screen.
Projection angle can be adjusted up to 10.0 degrees with the adjustable feet.
Lift the front of the projector and push the feet lock
latches on the projector.
1
Release the feet lock latches to lock the adjustable
feet and rotate the adjustable feet to adjust the
position and tilt.
To retract the adjustable feet, lift the front of the
projector and push and undo the feet lock latches.
Keystone distortion of the projected image can be
corrected with the remote control or menu operation.
(pp.22, 46)
Adjustable Feet
2
3
Adjustable Feet Feet Lock Latches