Sanyo PLC-XC50 - Connecting to a Computer

14
Installation
Connecting to a Computer
Cables used for connection
• DVI Cable or DVI-VGA Cable
• VGA Cables (Mini D-sub 15 pin) (Only one cable is supplied.)
• Audio Cables (Mini Plug: stereo)
( Not all the cables are supplied with this projector.)
Notes:
• Input sound to the COMPUTER 2 / COMPONENT AUDIO IN terminal when using the COMPUTER IN 2
/COMPONENT IN as input.
• Input sound to the COMPUTER 1 AUDIO IN terminal when using the COMPUTER IN 1 / DVI-I terminal
as input.
•
When the AUDIO OUT is plugged-in, the projector's built-in speaker is not available.
Unplug the power cords of both the projector and external equipment from the AC outlet before
connecting cables.
External Audio Equipment
V G A
cable
Audio cable
(stereo)
Monitor Output
COMPUTER 2
/ COMPONENT
/COMPUTER 1
AUDIO IN
AUDIO OUT
(stereo)
Audio Input
Monitor Output
COMPUTER IN 2
/COMPONENT IN
DVI-VGA
cable
COMPUTER IN
1/ DVI-I
VGA
cable
Audio cable
(stereo)
Audio Output
Installation
Monitor Input
MONITOR OUT
DVI
cable