-29-
Mechanical Disassembly
7 Sensor, RGB fan-net, Lamp fan-net boards removal
1 Remove 1 screw-A (T3x8) and remove the sensor board.
2 Remove 2 screws-B (T3x8) and remove the RGB fan-net board.
3 Remove 2 screws-C (T3x8) and remove the lamp fan-net board.
A
B
B
C
C
Lamp fan-net board
RGB fan-net board
Sensor board
8 Side panel ass'y removal
1 Remove 3 screws-A (M4x10) and 3 screws-B (T4x10) and remove the side panel
ass'y upward off.
A
A
A
B
B
B
Side panel ass'y
To: FG Net
board
To Next Page
Loading...
