Sanyo PLC-XF1000 - Selecting Computer Input Sources

-32-
Mechanical Disassembly
9-1 Power box ass'y removal-1
1 Remove 1 screw-A(M3x6) and 1 screw-B(M3x6) and remove power box cover.
2 Remove the sockets on the noise filter.
3 Remove 3 screws-C(T3x10) and pull the power box ass'y upward off.
A
Power box ass'y
B
C
C
C
9-2 Power box ass'y disassembly
1 Remove 4 screws-A(T3x6) and remove the power(DC)
board.
2 Remove 2 screws-B(T4x10) and pull the power(PFC)
board ass'y upward off.
3 Remove 4 screws-C(T3x6) and remove the power(PFC)
board.
Power box cover
A
C
A
A
A
B
B
C
C
C
Power(PFC) board
Power(DC) board
Socket