Sanyo PLC-XF1000 - Selecting Video Input Sources

-33-
Mechanical Disassembly
9-3 Power box ass'y disassembly-2
Board removal
1 Remove 4 screws-A(T3x8) and pull the power board ass'y upward off.
2 Remove 4 screws-B(T3x6) and remove the ballast-1. Remove 4 screws-C(T3x6) and
remove the ballast-2.
3 Remove 4 screws-D(T3x6) and remove the power board.
4 Remove 2 screws-E(T3x6) and 1 screw-F(M3x6), and remove spacer and shield
plate.
Fans Removal
1 Remove 4 screws-G(M3x30) and remove the fan (FN905).
2 Remove 4 screws-H(M3x30) and remove the fan (FN906).
A
A
A
A
B
B
C
C
D
D
D
D
F
E
E
Ballast-1
FN906
Power board
G
G
G
G
H
H
H
H
FN905
Label side
Label side
Ballast-2