Proxy setting
Select Internet Options from Tools menu on the web browser and then select Connection tab and
click LAN Settings button. Properly set up your web browser's the proxy server settings according to
the local area network environment to which the projector is connected.
- Using proxy server
To use an external internet connection from the local area network, check the item Use a proxy
server and enter the proxy server address and port correctly in the proxy settings window. For further
instruction please consult your network administrator.
- Not using proxy server
Uncheck the item Use a proxy server.
If you connect the projector to the computer directly with UTP cross cable, it must be unchecked.
To designate proxy settings that will not use the
proxy server when accessing the projector installed
in the local area network, enter the IP address or
domain name here.
Flash Player Add-on setting
Select Manage Add-ons... from Tools menu on the
web browser. Select "Add-ons currently located
in Internet Explorer" from Show pull-down menu.
Make sure that the "Shockwave Flash Object" is
listed under the item "Enabled".
To Next Page
Loading...
Need help?
General