The network viewer function in the Light mode has following limitations;
- Cannot select the program or folder for the display.
- Cannot check up the images in the folder or program.
x Main setting page in the Light Mode display
How to use the setting page
To control and set up the projector, use the setting menus on the web browser. The basic operation and
procedures commonly used on this manual are described below.
Main menu
Returns to the display mode selection
page.
Setting page
The setting pallet appears after clicking the item. Change the
value by clicking s or t button, or type the number onto the
text box directly and then click Set button.
* Each item has a valid setting range respectively.
Example of the Setting Page
✐ The value in the text box indicates current value.
✐ Each item has a valid setting range. The setting value exceeding its range becomes invalid. Some control items can
not be used depending on the selected input mode or functions of the projector you use. In that case, the values of
those items are indicated with "---".
Returns to main menu
✐ The blank page appears if your PDA does not provide a Adobe Flash
Player. You need to install the Adobe Flash Player. (+p.45)
Setting Pallet
Page numbers
Sub menu tab
To Next Page
Loading...
Need help?
General