Initial setting
After installing the projector, perform the following basic initial setting.
Click Initial Setting on the main menu to display the initial setting page.
Item Description
Language ................. Switches display language on the setting page. English or
Japanese.
Model name ............ Indicates the model name of the projector.
Projector name ....... Sets the name of projector. This projector name is listed on
the application window of the Network Capture software.
Network PIN code ...........
Sets the Network PIN code to login the setting page (+p.30,
p.40)
PJLink ......................... Switches PJLink password authentication on or off.
Password................... Password for PJLink function
To Next Page
Loading...
Need help?
General