Start/stop the multi control
To start or stop controlling the multi-projectors, click Multi
control setting menu and select ON or OFF.
Multi control setting
OFF ..........Stops multi control function
ON ............ Starts multi control function. The multi control
menu will appear when ON is set. These items of
menu are linked to the main menu.
The multi controllable menus are "Power & Status", "PC
adjustment", "Control", "Setting", "E-mail setting", "Timer", "SNMP
setting" and "Network Viewer". Click each menu and perform
setting and adjustment.
✐ The word "MULTI CONTROL" appears on the each control page while
the multi control is operating.
This shows the multi control is
operating now.
Switches on and off the
multi-control function
To Next Page
Loading...
Need help?
General