Sanyo PLC XU115 - XGA LCD Projector Network Setup Guide

22
Chapter 3 Names and functions of the operating screen
Turn on the projector and select either “Wired” or “Wireless” from the input menu of the projector.
The “Please wait...” message will be displayed on the screen. After short time, the network connection
standby display screen will appear as below. While the “Please wait...” message is shown, you cannot
operate the projector.
Network connection standby display
Network Connection Standby Display

Sanyo PLC XU115 - XGA LCD Projector Specifications

General

Brand	Sanyo
Model	PLC XU115 - XGA LCD Projector
Category	Projector
Language	English