Sanyo plc-xu4001 - Page 56

56
Setting
Use the Point Ÿź buttons to select 2II, On 1
or On 2, and then press the SELECT button to
make a choice.
&KDQJHWKH3,1FRGHORFNVHWWLQJ
(QWHUD3,1FRGH
Use the Point Ÿź buttons to enter a number.
Press the Point ŻŹ buttons to fix the number
and move the red frame pointer to the next box.
The number changes to ¼. If you fixed an incorrect
number, use the Point ŻŹbuttons to move the
pointer to the number you want to correct, and then
enter the correct number.
Repeat this step to complete entering a four-digit
number.
After entering the four-digit number, move the
pointer to Set. Press the SELECT button so that
you can change the following PIN code lock
setting.
If you entered an incorrect PIN code, 3,1FRGH
and the number (¼¼¼¼) will turn red for a
moment. Enter the correct PIN code all over again.
(QWHUD3,1FRGH
&KDQJHWKH3,1FRGH
&KDQJHWKH3,1FRGH
&$87,21
:+(1<28+$9(&+$1*('7+(3,1
&2'(:5,7('2:17+(1(:3,1&2'(,1
&2/8012)7+(3,1&2'(120(0221
3$*($1'.((3,76(&85(/<,)<28
)25*(7<2853,1&2'(7+(352-(&725
&$112/21*(5%(67$57('
The PIN code can be changed to your desired
four-digit number. Press the SELECT button to
select 3,1FRGHFKDQJH. Pin code dialog box
appears, use the Point Ÿź buttons to enter the
current code. The New PIN code input dialog box
appears. Set a new PIN code.
This function provides the following options in
the cooling fans’ operation when the projector is
turned off (p.20).
L 1.... Normal operation
L 2.... Slower, lower-sound and longish-time than
the normal operation (L 1).
Fan