Sanyo PLV-WF10 - Page 10

-10-
B
B
B
B
B
B
B
A
A
A
Cabinet top
Lamp cover
B
Terminal-slots-unit
Ass'y main
B
B
A
A
A
A
A
A
1. Remove the connectors and the flexible
cables of the LCD panels from the
assembly Main. (Never touch the elec-
trodes of flexible cables.) Remove 6
screws A and remove the Assembly main.
2. Remove 2 screws B and pull the Terminal
slots unit upward and remove.
1. Turn 3 screws A and remove the
Lamp cover. (Note : The screws A
can not be removed from the Lamp
cover.)
2. Remove 8 screws B and remove the
Cabinet top.
3.
Lamp cover and cabi-
net top removal.
4.
Assembly main and
Terminal slots unit removal.