EasyManua.ls Logo

Sanyo PLV-Z2000 - Page 35

Sanyo PLV-Z2000
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R
L
18
LCD panel / prism ass'y removal.
1. Remove the 4 screws-A (M2.5x4) and remove the LCD panel / prism ass'y.
LCD panel / prism ass'y (Type-R)
A
A
A
A
LCD panel / prism ass'y
Panel Type Check
There are 2 types combination of the LCD Panel/Prism Ass'y and the optical unit, named Type-L and Type-R.Since both have no
compatibility, each type should be combined with the same type, and the specificparts should be used. If not, the poor optical
characteristics may degrade the quality of a projected image.
When replacing the LCD Panel/Prism Ass'y,you need to take "Panel Type Check and Setting" on the Electrical Adjustment.
The gamma-characteristics is different between Type-L and Type-R LCD Panel/Prism Ass'y
LCD panel / prism ass'y (Type-L)
- 35 -
Optical disassemblies

Other manuals for Sanyo PLV-Z2000

Related product manuals