Screws-A
Screw-B
Slot-F
Slot-F
Slot-E
3. Integrator lens adjustment-2
1. Adjust the 2 slots F to make color uniformity in white by using a slot screwdriver.
(Top and bottom shading are erased.)
Note;
Slot F is moved in parallel by operating the right and left simultaneously. Otherwise, the integrator
lens rotates. Refer to "1 Integrator lens adjustment-1".
2. Adjust the slots E to make color uniformity in white by using a slot screwdriver.
(Right and left shading are erased.)
3. Tighten 2 screws A and screw B to fix the integrator lens unit.
- 53 -
Optical Adjustments
To Next Page
Loading...
