To p
q w e r
t y u
i
i INPUT button
Selects input source. (p24, 32)
t MENU button
Opens or closes the On-Screen Menu. (p22)
e WARNING indicator
Lights red when the projector detects abnormal condition. This
also flashes red when the internal temperature of the projector
exceeds the operating range. (p45)
w
POWER indicator
Flashes red until the projector gets ready to be turned on. It
lights red when the projector is in the stand-by mode. It
remains green while the projector is under operation. When
the front cover is closed it lights orange.
y POINT (Upe/Downd/Left7/Right8) button
Selects an item or adjusts value in the On-Screen Menu. These
are also used to pan the image in the Digital zoom mode. (p40)
u SELECT button
Executes the item selected. It is also used to expand /
compress the image in Digital zoom mode. (p40)
r LAMP REPLACE indicator
Turns yellow when the life of the projection lamp draws to an
end. (p49)
q POWER ON–OFF button
Turns the projector on or off. (p19)
To Next Page
Loading...
