Sanyo PLV-Z3 - Computer Input; Input Source Selection

32
Choose INPUT source by pressing the INPUT button on the top
control or PC button on the remote control.
Select the Input Source Selection Menu with the Point Up/Down
button, and then press the Point Right button to enter the sub-
menu.
1
Select Computer with Point UP/DOWN button and then press
the Point Right button. The Source Select Menu will appear.
2
Move the pointer to the source that you want to select and then
press the SELECT button.
3
When the input terminal is Scart with a DVD player
connected to the COMPUTER terminal , select
RGB (Scart).
RGB (Scart)
When the input source is analog coming from a
computer connected to the COMPUTER terminal,
select RGB (Analog).
RGB (Analog)
Input Source Selection
Direct Operation
Menu Operation
Input Menu
Source Selection Menu
pointer
Closes the source selection menu.
Top Control Remote Control
INPUT
SELECT
USER SETTING
MY PICTURE
COMPO.1
COMPO.2
LAMP MODE
CLEAR
DARK
U - 1 U - 2
U - 3
U - 4
LAMP
S-VIDEO
VIDEO
C 1
C 2
HDMI
PC
INPUT buttons
Computer Input