Sanyo PLV-Z3 - 3. RELAY LENS ADJUSTMENT

22
Basic Operation
Press the MENU button on the top control or on the remote
control to display the On-Screen Menu (Main Menu).
Select a menu from the main menu by pressing the Point
Up/Down button, and press the Point Right button to enter
the sub-menu. (The selected icon turns yellow.)
When using the top control, press the MENU button to close
the On-Screen Menu.
When using the remote control, both main menu and sub-
menu can be closed by pressing the MENU button. Pressing
the CANCEL button once, then you will go back to the
previous screen. Or press CANCEL button twice, the On-
Screen Menu will be closed.
Select an item by pressing the Point Up/Down button, and
activate the item that you have selected with the
(SELECT), (Point Left),
or
(Point Right) button.
1
2
4
3
You can control and adjust this projector through the On-Screen
Menu. Refer to the following pages to operate each adjustment
on the On-Screen Menu.
LAMP
REPLACE
MENU
INPUT
SELECT
Top Control
Point
Right
button
Item
LL
LIGHT
RESET
MENU
CANCEL
SCREEN
SELECT
SELECT button
POINT button
Remote Control
MENU button
On-Screen Menu
MENU button
SELECT button
POINT button
On-Screen Menu (Main Menu)
On-Screen Menu (Sub-Menu)