9
Part Names and Functions
A built-in micro processor which controls this unit may occasionally
malfunction and need to be reset. This can be done by pressing the
RESET button with a pen, which will shut down and restart the unit. Do
not use the RESET function excessively.
q COMPUTER
Connect computer output, or RGB Scart 21-pin video output to
this connector. (p17,18)
Te r minal
q
w
t e
t
VIDEO
Connect the composite video output from video equipment to
this jack. (p16)
r COMPONENT 1 / 2
Connect the component video output to these jacks. (p16)
e S-VIDEO
Connect the S-Video output from video equipment to this jack.
(p16)
w SERVICE PORT
This jack is used to service this projector.
*
*
ry
y
HDMI
Connect the HDMI from video equipment to this terminal.
(p17)
To Next Page
Loading...
