Sanyo PLV-Z3 - Video System Selection

26
Video Input
AV System Menu (Video or S-Video)
AV System Menu (Component)
Select the AV System Menu with the Point Up/Down button,
and then press the Point Right button to enter the sub-menu.
Choose the system that you want to select with the Point
Up/Down button and then press the SELECT button.
1
2
If the projector cannot reproduce proper video image, it is necessary
to select a specific broadcast signal format among PAL, SECAM,
NTSC, NTSC 4.43, PAL-M, and PAL-N.
PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N
The projector automatically detects incoming video signal, and adjusts
itself to optimize its performance.
If the projector cannot reproduce proper video image, it is necessary
to select a specific component video signal format among 480i, 575i,
480p, 575p, 720p, 1035i, and 1080i.
Auto
Component Video Signal Format
Video or S-Video
Component
The projector automatically detects incoming video system, and
adjusts itself to optimize its performance.
When Video System is PAL-M or PAL-N, select system manually.
Auto
Video System Selection
The projector automatically detects incoming video signal, and adjusts
itself to optimize its performance.
Selected system
HDMI
AV System Menu (HDMI)