Sanyo PLV-Z3 - Page 25

25
Video Input
Select the Input Source with the Point Up/Down button, and
then press the Point Right button to enter the sub-menu.
Select Input source with the Point Up/Down button and then
press SELECT button.
1
2
When video input signal is connected to the VIDEO jack,
select Video.
Video
When video input signal is connected to the S-VIDEO
jack, select S-video.
S-Video
Menu Operation
Input Source
When video input signal is connected to the Y-Pb/Cb-
Pr/Cr jacks, select Component 1 / 2.
COMPONENT
1 / 2
When video input signal is connected to the HDMI termi-
nal, select HDMI.
HDMI