Sanyo PLV-Z3 - 6. AV BOARD REMOVAL

11
Part Names and Functions
LL
LIGHT
RESET
MENU
CANCEL
SCREEN
IMAGE ADJ.
SELECT
USER SETTING
MY PICTURE
COMPO.1
COMPO.2
LAMP MODE
CLEAR
DARK
U - 1 U - 2
U - 3
U - 4
LAMP
S-VIDEO
VIDEO
C 1
C 2
HDMI
PC
Remote Control
q
w
e
!4
r SCREEN button
Selects a screen size. (p30, 31, 40)
!3 AUTO PC button
Operates the Auto PC adjustment function. (p34)
e POINT (UP/DOWN/LEFT/RIGHT) button
Selects an item or adjusts value in the On-Screen Menu. These are also
used to pan the image in the Digital zoom mode. (p40)
w MENU button
Opens or closes the On-Screen Menu. (p22)
u POWER ON-OFF button
Turns the projector on or off. (p19)
!4 NO SHOW button
Turns the picture into black image. (p21)
!6 LAMP button
Selects a lamp mode. (p29,39)
!2 IMAGE buttons
Selects an Image Level.(p27, 37)
!0 SELECT button
Executes the item selected, or to expand or compress image in the
Digital zoom mode. (p40)
q LIGHT button
Lights the buttons on the remote control for about 10 seconds.
!0
r
!3
u
t INPUT buttons
Selects input source. (p24, 32)
!5 MY PICTURE button
Displays the captured image. (p21,42)
y KEYSTONE buttons
Corrects keystone distortion. (p21, 41)
!1 IMAGE ADJ. button
Displays the On-Screen Menu of the Image Adjust Menu in a line and
adjusts image level. You can directly adjust an item. (p28, 29, 38,39)
!5
t
o
!1
!6
y
i
i RESET button
Resets to the previous figure.
When selecting main menu, all the items will be reset. When
selecting sub-menu, the selected item will be reset. This button works
when selecting Image level adjustment, Computer adjustment
(Manual), Keystone and Digital zoom function.
o CANCEL button
Goes back to the previous screen. When there is no previous screen to
go back, displaying screen will disappear.
!2