Sanyo PLV-Z3 - Circuit Adjustments

24
Input Source Selection (Video, S-Video, Component1/2, HDMI)
Choose Input source by pressing the INPUT button on the top control
or INPUT buttons on the remote control.
Direct Operation
USER SETTING
MY PICTURE
COMPO.1
COMPO.2
LAMP MODE
CLEAR
DARK
U - 1 U - 2
U - 3
U - 4
LAMP
S-VIDEO
VIDEO
C 1
C 2
HDMI
PC
Top Control Remote Control
INPUT buttons
Press the VIDEO, S-VIDEO, COMPO.1 COMPO.2 or HDMI button on
the remote control according to video input .
SCREEN
IMAGE ADJ.
SELECT
USER SETTING
MY PICTURE
COMPO.1
COMPO.2
LAMP MODE
CLEAR
DARK
U - 1 U - 2
U - 3
U - 4
LAMP
S-VIDEO
VIDEO
C 1
C 2
HDMI
PC
Remote Control
INPUT buttons
INPUT buttons: VIDEO / S-VIDEO / COMPO.1 /
COMPO. 2 /HDMI
When video input signal is connected to the VIDEO jack,
select Video.
VIDEO
When video input signal is connected to the S-VIDEO
jack, select S-video.
S-VIDEO
INPUT
SELECT
When video input signal is connected to the Y-Pb/Cb-
Pr/Cr jacks, select COMPO.
COMPO.
1/2
When video input signal is connected to the HDMI termi-
nal, select HDMI.
HDMI
Video Input