102 Section 2F: Using Contacts
Assigning an Image to a Contacts Entry
You can assign an image to a Contacts entry. The image is
displayed when the entry calls you.
To assign an image for an entry:
1. Press the navigation key right.
2. Select the Contacts entry for which you want to assign
the image and press .
3. Press Options (right softkey) > Edit. (If selecting an
Email/Web address, just press Edit [right softkey].)
4. Scroll down to Picture ID and press .
5. Select your desired option (Normal Picture/Image,
My Content, Get New, In Camera, or Saved to Phone) and
press .
Tip: You can also take a picture by selecting Take Picture as an option here.
6. Select your desired image and press , and then press
OK (left softkey) to assign.
7. Press Save (left softkey) to save the image type.
To Next Page
Loading...
Need help?
General
