122 Section 2H: Using Your Phone’s Voice Services
Using Voice-Activated Dialing
In addition to Sprint PCS® Voice Command (see page 228), you
can use a voice dial tag to automatically dial a phone number
in your Contacts. (A voice dial tag is a command you record and
use to place calls without using the keypad.) Your phone can
store up to 30 voice dial tags.
Note: Please set the Voice Prompt feature (see page 52) to on before using
the Voice-Activated Dialing so that you can hear the voice instruction from
the phone. The default setting is off.
Making a Call Using Voice-Activated Dialing
With the flip open:
1. Press or briefly.
2. Follow the system prompts and recite the entry’s Voice
Dial tag into your phone’s microphone.
With the flip closed:
1. Press and hold .
2. Follow the system prompts and recite the entry’s Voice
Dial tag into your phone’s microphone.
Note: To use the Voice Dial function, you must have a stored entries for
Voice Dial (see “Programming Voice Dial Tags”below).
Programming Voice Dial Tags
To program a voice dial tag:
1. Select > Tools > Voice Services > Voice Dial > Program.
2. You will be prompted to say the name you want to
program. Say the name after the beep.
3. Repeat the name after the beep.
To Next Page
Loading...
Need help?
General
