Sanyo SCP-3100 - Adding a New Contact to Your Personal List

166 Section 2J: Using Sprint PCS Ready Link
Adding a New Contact to Your Personal List
You can store a total of 200 entries in the Personal Lists.
To add a new Sprint PCS Ready Link contact:
1. Press R-Link (left softkey) or press .
2. Select Go to > Personal List > <Add Contact>.
– or –
Select a contact and press Options (right softkey). Then
select Add Contact.
3. Enter a name for the new contact and press . (This is
the name you will see when calling or receiving a call
from the contact.)
4. Select R-Link Number, enter the contact’s 10-digit
Sprint PCS Ready Link number (their wireless phone
number), and press .
5. Press Save (left softkey) to save the new contact to your
Personal List.
Tip: You are not allowed to use the following symbols during step 3:
@ : ; / * ) (.