Sanyo SCP-3100 User Manual

Section 2A: Your Phone – The Basics 39
Phone Basics
Dialing From the Contacts List
To dial directly from a Contacts entry:
1. Select > Contacts > Find/Add Entry.
Shortcut: Press the navigation key right to list entries.
2. Highlight the entry you want to call and press or
to dial the entry’s default phone number.
– or –
To dial another number from the entry, highlight the
name and press , highlight the number you wish to
call, and press , , or Call (left softkey).
Tip: You can also place a call by selecting Options (right softkey) > Call or
Call:Speaker On.
Note: The icons next to each entry represent the Contacts labels (for
example, Mobile, Home, Work, etc.). A triangle next to an icon means there is
another label for the entry. Press the navigation key right or left from the
Contacts list to select the desired label.
Using Speed Dialing
With this feature, you can dial your favorite entries using one
key press for locations 2–9. (See “Assigning Speed Dial
Numbers”on page 101.)
To use speed dial for voice calls:
䊳
From standby mode, press and hold the appropriate key
for approximately two seconds.
– or –
䊳
From standby mode, press the appropriate key and press
or .

Sanyo SCP-3100 Specifications

General

Brand	Sanyo
Model	SCP-3100
Category	Cell Phone
Language	English