Sanyo SCP-3100 - Recording a Customized Announcement; Reviewing an Announcement

128 Section 2H: Using Your Phone’s Voice Services
Recording a Customized Announcement
To record an announcement:
1. Select > Tools > Voice Services > Screen Call >
Announcement.
2. Select Custom and press Edit (right softkey).
3. Select Record.
䡲
When an announcement has already been recorded,
select Yes to overwrite the existing recording.
4. Press to start the first recording. (Press to stop
recording.)
5. After the first recording, press again to start the
second recording.
6. Press to stop recording.
Tip: The maximum recording time is 12 seconds.
Reviewing an Announcement
To review an announcement:
1. Select > Tools > Voice Services > Screen Call >
Announcement.
2. Select Pre-Recorded or Custom and press Edit (right
softkey).
3. Select Play or Play:Speaker.