Section 2F: Using Contacts 103
Selecting a Ringer Type for an Entry
You can assign a ringer type to a Contacts entry so you can
identify the caller by the ringer type. (See “Ringer Types”on
page 49.)
To select a ringer type for an entry:
1. Press the navigation key right.
2. Select the Contacts entry for which you want to set the
incoming ringer and press .
3. Press Options (right softkey) > Edit. (If selecting an
email/Web address, just press Edit [right softkey].)
4. Scroll down to Ringer and press .
5. Select your desired ringer and press . (When you
highlight a ringer type, a sample ringer will sound.)
6. Press Save (left softkey) to save the ringer type.
Contacts