158 Section 2J: Using Sprint PCS Ready Link
Making a Sprint PCS Ready Link Call
(One-to-One Call)
You can place a one-to-one Sprint PCS Ready Link call by
entering a Sprint PCS Ready Link number or by selecting a
contact from the Sprint PCS Ready Link List.
To place a Sprint PCS Ready Link call by selecting a contact:
1. Press R-Link (left softkey) or press .
2. Press Go to (left softkey), select the list from which you
want to place a call (Company List, Company Groups,
Personal List,Personal Groups,Outgoing,Incoming,or
Missed), and press .
Tip: You can also select Enter R-Link# from the Go to option to enter a
Sprint PCS Ready Link number directly. (See page 160 for details.)
3. Scroll to the contact you want to call, and press and
hold to place the call and get the floor. (You will
see “R-Link calling...”and “Connecting...”followed by
“You have floor.” You can now begin speaking.)
– or –
Scroll to the contact you want to call and press and
release to place the call. (The call will connect as
described above, but “Floor is open.”will appear on the
screen and either you or your contact may press and hold
to take the floor and speak.)
Note:
During a Sprint PCS Ready Link call, the “floor”is the right to speak. When you
see “Floor is open.,”the first person to press the Ready Link/Memo button
can speak (while holding the button). Only the person who has the floor can speak.
The phone beeps if you press when another contact has the floor.
4. Continue holding as you speak. (When you have
finished speaking, release to allow the other
contact to speak. When the other party takes the floor,
you will see the speaker’s name and phone number and
the text “has floor.”)
To Next Page
Loading...
Need help?
General
