Sanyo VPC-J2 User Manual

187 English
TROUBLESHOOTING
Problem Cause Action
Reference
page
Viewing
images
The image is
too dark.
The flash was
blocked by a
finger or other
object.
Hold the digital
camera
correctly, and
make sure the
flash is not
obstructed.
37
The subject
was too far
away.
Capture the
image in the
range of
operation of
the flash.
194
The subject
was lit from
behind.
Use the forced
flash mode.
68
Use the
exposure
correction
function.
110
There is not
enough light.
Adjust the ISO
sensitivity
setting.
107
The video clip
picture is
flickering.
The video clip
was filmed
under
fluorescent
lighting.
Set the flicker-
reduction
setting to on. 112
Camera_EN.book Page 187 Sunday, August 31, 2003 3:48 PM

Sanyo VPC-J2 Specifications

General

Brand	Sanyo
Model	VPC-J2
Category	Digital Camera
Language	English