Sanyo VPC-J2 User Manual

English 188
Problem Cause Action
Reference
page
Viewing
images
The image is
too bright.
The forced
flash mode is
selected.
Select a
different flash
mode.
68
The subject
was too bright.
Use the
exposure
correction
function.
110
The ISO
sensitivity
setting is
incorrect.
Set the ISO
sensitivity to
.
107
The image is
not in focus.
The subject is
too close to the
digital camera.
Select the
correct focus
setting for your
needs.
103
The focus
setting is not
correct.
The digital
camera moved
when the
shutter was
released.
Hold the digital
camera
correctly and
slowly press
the shutter
release button
halfway to lock
the focus.
Then press the
shutter release
button all the
way to capture
the image.
37, 42
The focus is
not locked
properly.
The lens is
dirty.
Clean the lens.
21
Camera_EN.book Page 188 Sunday, August 31, 2003 3:48 PM

Sanyo VPC-J2 Specifications

General

Brand	Sanyo
Model	VPC-J2
Category	Digital Camera
Language	English