Sanyo VPC-J2 User Manual

189 English
TROUBLESHOOTING
Problem Cause Action
Reference
page
Viewing
images
The colors of
the images
captured
indoors are not
correct.
This is due to
ambient
lighting.
Capture the
image using
the forced
flash mode.
68
The white
balance setting
is incorrect.
Set the white
balance setting
correctly.
105
A part of the
image is
missing.
The handstrap
or a finger was
blocking the
lens opening.
Hold the digital
camera
correctly, and
make sure the
lens is not
obstructed.
37
“NO IMAGE”
or “NO AUDIO”
is shown.
There is no
recorded data
for the
selected
playback
mode.
Set to a
different
playback
mode.
72
No image
appears on the
LCD monitor.
The camera is
connected to a
computer or
TV.
No image
appears on the
LCD monitor
while the
camera is
connected to a
computer or
TV.
157
During audio
playback,
there is no
sound.
The volume
setting on the
digital camera
is too low.
Select the
volume icon
and adjust
the volume.
81
No voice
memo was
recorded with
the image.
Select the add
voice memo
setting, and
speak into the
microphone.
128
Camera_EN.book Page 189 Sunday, August 31, 2003 3:48 PM

Sanyo VPC-J2 Specifications

General

Brand	Sanyo
Model	VPC-J2
Category	Digital Camera
Language	English