ONSCREEN DISPLAY (OSD)
...
!t=-a~-.-ii1161~:m
PREPARATION
•
Turn on the power of both the VCR and TV.
•
Be
sure the TV is set to the VCR Output Cha
nn
el
(C
H 3 or 4).
•
If
a direct VIDEO/AUDIO connection is made between the
VCR and the
TV,
set the TV's source selector to VIDEO.
ONSCREEN FUNCTION DISPLAYS
Some of these functions will
be
displayed every time the VCR
is
operated .
.----------
FUNCTION DISPLAY
PLA
Y
SP
Indicates the function
in
progress .
.------
HI-FI DISPLAY
Indicates
when
this unit
are
playing back
tape
recorded
with
HI-Fl.
CHANNEL DISPLAY
Indicates
the selected channel (or
LINE1
, LINE2).
STEREO/SAP DISPLAY (MONO
is
not displayed)
Shows the type of audio signal received
by
the VCR tuner.
1--
-
--
-
+-
TAPE SPEED DISPLAY
JUL
S,THU
Shows the current tape speed.
CLOCK/COUNT/REMAIN DISPLAY
Shows
the current time, the tape counter and remaining time
on
the tape.
'--------
DATE
DISPLAY
Shows
the current date. (Month/Day/Day of the week format)
Each press of the ENTER changes the
TV
screen in the follow-
ing sequence.
STOP
CH
4
SP
STEREO
JUL
5.
THU
2:15PM
REM
1:58
N(i)TES
• The function displays can
be
seen displayed
on
the TV screen
for 5 seconds.
• The clock (or tape counter, tape remaining) mode will contin-
ue
until you press ENTER.
• The tape counter and the remaining tape length indicator
appear only when a cassette is inserted. Also, the remaining
tape length indicator appears after any tape operation.
To Next Page
Loading...
