IN
S
TA
LL
ATI
ON:
Placing your VCR
on
the top of or under the TV receiver may result
in
interference appearing
on
the TV screen when the VCR
is
on.
If this occurs, move the VCR
to
a position alongside the
TV
receiver.
VCR
TO
TV CONNECTION·
-------
When
using
the RF coaxial cable (Supplied)
Connect the 75-ohm Coaxial Cable
to
VHF/UHF/CATV
on
the VCR. Connect the other end
to
the 75-ohm
antenna input
on
back of the
TV.
To AUDIONIDEO
IN
AUDIONIDEO Cable (Not supplied)
From
AUDIONIDEO OUT
75
ohm
Coaxial Cable (Supplied)
To
VHF/UHF/CATV
VCR's Back Panel
When using
the
AudioNideo
cable (Not supplied)
TV
set
If your TV has
AN
input jacks, you may connect your VCR's AUDIONIDEO jacks
on
back of
your
TV.
Direct audio/video connections usually result
in
a better picture and sound quality for tape
playback. Please see your TV's owner's manual for details. Then set your TV to the VIDEO
mode using the
TVNIDEO
button
on
your
TV.
6
To Next Page
Loading...
Need help?
General
