SPECIAL EFFECTS PLAYBACK
These special effects are available during playback.
TO WATCH A STILL (or Frame Advance) PICTURE
During PLAYBACK mode ...
1 Press PAUSE
or
PAUSE/STILL on
thP.
front panel.
Still
picture will appear
on
the TV screen.
•
If
a still picture vibrates vertically, stabilize
it
by
pressing
CHITRACK
(~/..-)
on
the remote control.
•
If
the VCR
is
left
in
the STILL mode for more than 5 minutes,
the
VCR will automatically enter the STOP mode to
protect the tape and video heads.
2 Press PAUSE repeatedly to advance the video picture one
frame at a time while viewing a
still picture.
3
To
continue normal playback, press PLAY.
VISUAL SEARCH FUNCTION
This function lets you quickly and visually search for a desired
tape section
in
either direction: forward and reverse.
During PLAYBACK mode ...
1 Press desired search button (FF
or
REW).
The VCR will
be
activated
in
the SEARCH mode and SCH or
SCH- will appear on the VCR indicator panel.
•
If
the VCR is left
in
the SEARCH mode for more than 3 min-
utes, the
VCR will automatically enter the
PLAY
mode, to pro-
tect the tape and video heads.
2
To
continue normal playback, press PLAY.
USING THE SLOW MOTION FEATURE
During PLAYBACK mode ...
1 Press SLOW.
The tape will
be
played back at a speed 1/19 times slower than
the normal speed.
• During slow playback, CHITRACK
(AfT)
on
the Remote
Control
can
be
used to minimize noise bands.
• When the slow mode continues for more than 30 seconds, the
VCR will automatically change to PLAYBACK mode.
2 Press PLAY to return to normal playback speed or press
STOP to stop tape movement.
25
To Next Page
Loading...
