Indicator Panel TV Screen
I
2:
: 5
~
I
I 2:15AM I
+ CLOCK +
an
5 I I 0:05:25 I
'--------
-'
+ COUNTER +
I REM1:07 1
REMAINING TIME
TV Screen
REM
1:07 1
REAL-TIME COUNTER
Shows length of tape
run
in
hours, minutes, and seconds (refer
to
the left). Press CLK/COUNT
to
select the real-time counter
display.
Every press of CLK/COUNT changes the TV screen as illustrat-
ed
left.
•
Counter changes to 0:00:00 when the cassette is ejected.
• The real-time counter does not operate when nothing
is
recorded
on
the tape.
• The real-time counter will not work when the tape is not insert-
ed.
COUNTER MEMORY FUNCTION
This is useful if there
is
a section of tape you want to view imme-
diately after recording or if
you
want to return
to
the same point
several times.
1 Begin recording or playing a tape.
2 Press CLK/COUNT repeatedly to display the real-time
counter appears
on
the
TV
screen.
3 At the point that you want locate later, reset the real-time
counter to 0:00:00 by pressing CLEAR.
4 Continue to play or record.
5 Press STOP when recording or playback finishes.
6 Press REW.
The tape
automatically stops when the tape counter returns
to
about "0:00:00".
TAPE REMAINING
This function allows the time of the remaining tape
to
be
dis-
played during recording or playback.
Press CLK/COUNT until the
REM
indicator displays
on
the TV
screen during recording or
playback.
NOTE·
The remaining tape length indicator may not be displayed
correctly
depending
on
the condition of the tape and the kind of
the tape {T-140, T-160, or T-210 etc)
To Next Page
Loading...
Need help?
General
