Sanyo Xacti VPC-HD1010GX - Page 79

English 60
SETUP
1 Video clip settings (page 93)
<HD mode>
<SD mode>
2 Still image settings (page 94)
3 Scene select (page 99)
4 Filter (page 101)
5 Flash (page 102)
6 Self-timer (page 103)
7 Remaining battery power
(page 175)
!: Record at 1920 × 1080
pixels, 60 fields/s.
Y: Record at 1920 × 1080
pixels, 30 fps.
": Record at 1280 × 720
pixels, 60 fps.
&: Record at 1280 × 720
pixels, 30 fps.
(: Record at 640 × 480 pixels,
60 fps.
): Record at 640 × 480 pixels,
30 fps
X: Record at 448 × 336 pixels,
300 fps
l: Record at 320 × 240 pixels,
30 fps.
<: Make an audio recording.
J: Image size is 3264 × 2448
pixels.
M: Image size is 2288 × 1712
pixels (low compression).
L: Image size is 2288 × 1712
pixels (normal
compression).
*: Image size is 2496 × 1408
pixels (16:9 aspect ratio).
+: Image size is 1920 × 1080
pixels (16:9 aspect ratio).
G: Image size is 1600 × 1200
pixels.
,: Image size is 1280 × 720
pixels (16:9 aspect ratio).
[: Image size is 640 × 480
pixels.
c: Image size is 2288 × 1712
pixels.
=: Full auto setting
a: Sports mode
>: Portrait mode
+: Landscape mode
/: Night view portrait mode
k: Snow & beach mode
+: Fireworks mode
Q: Lamp mode
&: No filter
%: Cosmetic filter
W: Monochrome filter
,: Sepia filter
k: The camera will detect the
subject brightness and use
the flash only when
necessary.
m: The flash will operate with
every image captured
regardless of the
conditions.
l: The flash will not operate
even in dark situations.
n: The camera will detect the
subject brightness and use
the flash only when
required. At this time the
flash will operate in a
manner that reduces the
red reflection (“red-eye”) in
the subject’s eyes.
N: Self-timer is off.
y: Shooting begins 2 seconds
after the [ ] or [ ]
button is pressed.
x: Shooting begins
10 seconds after the [ ]
or [ ] button is pressed.