EasyManua.ls Logo

Sanyo Xacti VPC-HD1010GX - Focus Range

Sanyo Xacti VPC-HD1010GX
251 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
107 English
FOCUS RANGE
1 Display the NORMAL Mode Shooting Menu (page 49), select
“FOCUS”, and press the SET button.
h When shooting a subject at a medium to far distance, by setting the
focus range to *, you will find it both easier and faster to focus.
h When the focus range is set to *, + or -, the corresponding
indication appears on the monitor.
2 Select the desired icon, and press the SET button.
h This completes the focus range setting.
HINT
i When the focus range is set to super macro +, the zoom is temporarily
set to the wide end.
i By assigning an operation shortcut to the SET button (page 151), you can
change the focus range setting from the Shooting Screen.
-: Wide end: 10 cm (3.94 in.) to infinity
Tele end: 1 m (3.28 ft.) to infinity (total range mode)
*: 80 cm (31.50 in.) to infinity (normal mode)
-: The focus can be manually set to any distance from 1 cm
(0.39 in.) to 40 m (131.23 ft.), as well as to infinity (manual
focus).
+: 1 cm (0.39 in.) to 1 m (3.28 ft.) (super macro mode: wide end
only)

Table of Contents

Related product manuals